On getting the LNP and trying to get that working, I struggled, in the end I kind of had it unreliably working if I combiined the HX1000i and LNP into a single 9 pin USB header. The asus X470 Prime Pro only has 2 internal USB headers, and whilst I could get the HX1000i and CoPro working themselves, the CoPro USB headers didn't work at all (seemed dead). I finally got it working after seeing suggestions in other threads about using the NZXT internal USB hub. Just thought I'd bump a few threads on this. I had a free USB 3 header in my Motherboard, and one of these laying around:Īnd I could connect my AX1200i and finally have the data back in Corsair Link (can't use iCue, I have an original H100i that isn't compatible with it).īut if you also have a free USB 3 header, all you'd need is one of these: Hey all, tired of waiting for a fix that won't come, I took matters into my own hands to fix the issue. (Usb2 to mini usb b cable used) Edited Januby MrKartoffel Tbc :/ĮDIT: It works now, plugged in the cable into the ln and one usb port outside of the case. Thanks for your advice, I will buy one too and test it with my system. I think I have the same problem like everyone else here. This worked for me and now my RBG is up and running beautifully. So if anyone running into these issues with some of the amd motherboards or chipsets where the usb headers on the commander pro are not being recognized by the system. Luckily there was a nice spot to just run it out the back of my case and into a empty usb slot. While it's not ideal solution it worked! And now I have control over all my lights, fans, and h150i. And after tinkering around with all the suggestions I could find from all over I bought this, figured I could live with 5 bucks going to waste if it didn't work. Ok instead of trying out a y splitter for the usb hub which may have worked dunno for sure. In summation, if the newest BIOS version doesn't work for you, maybe try an older one?. I left all the USB related options to their defaults (Auto) and everything started working again. I downgraded to version 0702 and many USB options and controls reappeared. The only related option that still remained was the XHCI handoff which was enabled. Digging through the new BIOS, I noticed a lot of USB handoff/control options no longer existed. Every other Corsair device worked just fine. Most notably my H150i AIO (connected on the Commander Pro) and the ST100 stand connected regular USB.Įventually, I got tired of the random flickering so I upgraded my BIOS to version 1103 (newest), but the H150i AIO AND my HX850i power supply (both connected to the Commander Pro USB headers) stopped appearing inside iCue. When I first got my motherboard, it had the version 0509 BIOS and the USB headers were working, but different Corsair devices would disconnect and reconnect randomly. Ok, so I was able to resolve the issue on my motherboard (ASUS Crossfire Hero VII WiFi).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |